Whenever you need to know actual operating
pressure, Aquatec’s stand-alone Pressure Transducers provide an effective, economical solution. These devices offer true linear pressure sensing capabilities in a compact, robust housing. They can either be used with a digital display, connected to a circuitboard, or connected directly to a controller card.
Our Transducers come with a strained relief, 6 foot long leadwire and have a typical operating range of 0-100 PSI. Porting is a flow–through design and available with John Guest “quick connect” fittings for 1/4”, 5/16” (8mm), and 3/8” tubing. The 4 wire system provides linear low level output from a
piezoresistive straingauge. A proportional voltage output is generated which represents the measured pressure.

• NSF Approved
• Flow-Through Design (i.e. no “Dead Legs”)
• 1-100 PSI Sensing Capability
• 0-150 mV Output

WETTED MATERIALS: Polypropylene, Santoprene, EPDM
POWER REQUIREMENTS 3-12VDC
DIMENSIONS AND WEIGHT: Approx 2” x 1” x 1”, 4 oz.
PROOF PRESSURE 150 psi
SENSITIVITY: .25mV/V/psi
LINEARITY AND HYSTERESIS: 5%
INPUT RESISTANCE: 4.1 kOHMs