Aquatec’s 550 Series delivers powerful flow rates up to 5.5 GPM/21 LPM at pressures up to 80 PSI/5.5 Bar. Our patented 5-chamber diaphragm and piston design allows these pumps to operate at exceptionally quiet noise levels and with minimal pulsations. Like our smaller, 3-chamber 5800/7800 Series, these pumps are designed for intermittent duty, though most models can be run continuously for hours at a time.
These pumps are commonly used either to pressurize water from an atmospheric tank, to deliver purified water to a specific point of use, or simply to increase pressure when required. These pumps can either be controlled by a pressure switch (“demand” mode) or an external power control device (“delivery” mode). When required, an integrated bypass can be incorporated to help regulate pressure levels.

POWER: Available motors from 12VDC to 230VAC, energy requirements between 50W-200W
(depending on flow, pressure). Can be used with compatible transformers and/or DC
power supplies, to be ordered separately. Standard terminations are 12”, stripped end
AWG leadwires, with connectors and power cords also available
ENVELOPE DIMENSIONS:: Approximately 4”x 5”x 8”, weighing 8 lbs
MOUNTING: All positions. Standard offering is a steel mounting base with four hollow rubber grommets
CONTROL OPTIONS: Internal Bypass (20-100 psi), Pressure Switch (40-70 psi)
FITTINGS: Pumphead options include 3/4”openings (for use with 3/8”, 5/8”, 1/2", and 3/4" hose barb,
quick connect fittings), and 1/2” NPT female ports, and John Guest 1/2” and 3/8” fittings.